VMC series CNC vertical machining center is x, y and Z axis servo control semi closed loop, with compact and reasonable structure and overall dimensions, and the main shaft is driven by servo motor. It can realize the processing of various processes such as drilling, milling, boring, expanding, reaming and tapping in one clamping for various complex parts such as plates, shells and molds. It is suitable for the processing of parts in automobile parts, electrical instruments, motorcycles, tools, hardware, motors and other industries. It can be used for the efficient processing and manufacturing of small and medium-sized parts The processing of high-precision parts shows its advantages. It can also form an automatic production line for mass production to ensure the product quality and efficient production of parts.
◆Main structure castings are made of high-quality Meehanna cast iron, with stable organization and permanent quality assurance;
◆Finite element analysis method for computer calculation and analysis of castings, reasonable structural strength and combination of reinforcing ribs, provide high mechanical rigidity;
◆Ultra-wide base and column are box-type structures, the saddle is widened and lengthened, the heavy-duty full support design, and the structure is solid, which can ensure the heavy-load capacity during processing;
◆Strengthened structure of tendons and bones in the spindle head, the contact length ratio between the spindle head and the column is appropriate, providing stable support for the spindle;
workbench◆Three-axis adopts linear slideway, which has the characteristics of high rigidity, high positioning accuracy, low noise and low friction, and can be used for rapid displacement and or best circle accuracy;
◆Ultra-wide base and column are box-type structures, the saddle is widened and lengthened, the heavy-duty full support design, and the structure is solid, which can ensure the heavy-load capacity during processing;
◆The machine adopts the oil-water separation design, which can effectively separate the lubricating oil and the cutting fluid, and prevent the cutting fluid from being deteriorated due to mixing and affecting the processing quality;
◆Centralized automatic lubrication device, timing and quantitative automatic intermittent lubrication, stable and reliable work
Tool magazine & Spindle
◆The total number of tools in the disc-type tool magazine is generally no more than 24 for 40# shank and no more than 20 for 50#. Large-scale gantry machining centers can also be equipped with chain-type tool magazines, with up to 60 tools.
◆Each tool position has a number, generally from 1 to 12, 18, 20, 24, etc., which is the tool number address. After the operator installs a tool into a tool position, no matter how many times the tool is replaced, it is always in the tool position.
◆The tool magazine is equipped with automatic tool changer ATC (Auto Tools Change) for automatic tool exchange.
◆High-precision, high-rigidity and high-precision spindle;
◆Servo motor drive;
◆Belt-type spindle has strong rigidity and reliability;
◆High-speed, high-efficiency, high-precision, direct-connected spindle, low noise and low vibration;
◆ fully meet the needs of users.
4th axis CNC indexing plate
After installing the 4th axis CNC indexing plate, multiple processes can be assembled into one process, and the precision is accurate to one thousandth of a degree. After using the numerical control indexing product, unlimited angles can be completed smoothly, which not only reduces the process but also greatly improves the efficiency and quality.
Product parameter
Specifications
VMC1270
X axis
1200mm
Y axis
700mm
Z axis
700mm
Spindle end face to workbench
130-830mm
Spindle center to column guide rail
767mm
X-axis rapid movement
18m/min
Y-axis rapid movement
18m/min
Z-axis fast movement
18m/min
Cutting feed
10m/min
Three axis servo motor torque
25N.M
Table area
1300x700mm
Table bearing
700kg
T-groove
5x18x115mm
Spindle speed
8000rpm
Spindle taper hole
BT50
Main motor power
11kw
Positioning accuracy (JIS standard)
±0.005/300mm
Repeat positioning accuracy (JIS standard)
±0.003mm
Overall dimension
3600x2600x2900mm
STANDARD CONFIGURATION
·Kandi 2100mc1i system
·Rigid tapping
·Fully enclosed outer cover sheet metal
·Guide rail telescopic guard
·BT40-24T disc type tool magazine
·BT40-8000rpm belt type spindle unit
·Separate handwheel
·Three-color warning light
·Machine tool lighting work lights
·Spindle air curtain dustproof system
·Programmable automatic blowing device
·Machine cleaning air gun
·Chipping fluid system
·Positive displacement centralized lubrication system
·Electric cabinet heat exchanger
·Power-off device for opening door of electrical cabinet
Our packaging adopts the international standard export wooden box packaging, the material is plywood, the bottom is the Iron pallet ，this kind of packaging is fumigation-free, can well fix the equipment and protect the equipment, suitable for sea and rail transportation.
